Enterprise Wireless CPE Gigabit Network Bridge

AIVO Network's ANCP9005GQ is an Enterprise Wireless communication device, which enables connection from existing LAN to remote location using the latest wireless technology. We strongly recommend professional installation.

• High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset

• Range up to 3.11miles (5km) away with line of sight

• Can be used to connect remote IP cameras to existing NVRs / DVRs

• Supports up to 867Mbps

• Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz bandwidth in use on most Wi-Fi today.

• Dual 14dBi antennas

• Supports the following operation modes: Bridge, Access Point, Router and Repeater

• Supports providing PoE power to a single IP camera attached to CPE

• Includes 48V PoE power injector which allows for powering CPE from up to 330ft. away

• LEDs provide information about system status and signal strength for alignment in Bridge mode

• Hardware Reset button

• Outdoor Rated down to -40°F

• Supports Pole, Wall or Rack Mounting

Additional programming may be necessary. Please consult with AVYCON's technical support team before mounting the bridge in its designated location. We recommend setting up the devices on a test bench first to ensure they are all programmed correctly for the desired application. These devices come out of the box in “Router” mode unless preconfigured differently as requested by distributors. Preconfigured bridges are usually labeled as such.

Enterprise Wireless CPE Gigabit Network Bridge